User Profile

[Dave P]

...

[Dave P]

Looking good Witek

[Dave P]

I would like to say a big thankyou to Stacey for organising this years event from me and all the forum ...

[Dave P]

Please do not use the forum to add links and or details to sales sites, any future posts will be deleted...

[Dave P]

If you want to post a picture from the web you can use the same procedure if you can download the picture to your PC (some sites dont allow this but most...

[Dave P]

...

[Dave P]

Click on Choose Photo/video which should open up your computers stored pictures

Click on the picture you want to use and it should appear...

[Dave P]

Since the site upgrade things may be slightly different but if you use Imgur or flickr the procedure should be the same, the new software doesnt allow...

[Dave P]

...

[Dave P]

Sorry I couldnt make it but will hope for next year,

...

[Dave P]

Hope you get it sorted ...

[Dave P]

refitting is the reverse of the above taking care to make sure you attach all hoses and try not to drop any of the chrome nuts which tend to fall in small...

[Dave P]

the bung that can cause idle issues

...

[Dave P]

Things to do when removed - check hoses especially ICV to air box and oil breather hoses

change the small rubber bung ontop of engine bracket...

[Dave P]

...

[Dave P]

Airbox should now be free and can be lifted out - its tight around the dip stick tube so worth placing a cloth around the tube

[Dave P]

If you can undo the 2 hose clamps that are under the airbox either with box in situ or lifted and tilted to give more access - this can be the worst part...

[Dave P]

Undo 2 13mm nuts underneath air box that attach to Y shaped bracket

...

[Dave P]

undo hose clamp on top of air box seen above between air tubes and slide off hose

[Dave P]

Unbolt chrome 10mm nuts that attach air tubes to throttle bodies


...